How to Align Garage Door Tracks: DIY Guides To Adjustment The Rails

How to Align Garage Door Tracks

If you have trouble with your garage door not opening or closing properly, the issue may be with the tracks. The good news is that fixing this problem is a relatively easy task and can be done in just 9 steps! In this blog post, we will walk you through how to align garage door tracks in a way that will have them working like new in no time.

9 Easy Steps About How to Align Garage Door Tracks Properly

If you have a garage door with two tracks, you will first determine which one is out of alignment. To do this, close the garage door and look at the top edge. If one track is higher than the other, that track is out of alignment. Once you have identified which track is out of alignment, it’s time to fix it! Follow these simple steps:

Step One: Loosen the Bolts on the Track Mounting Bracket

The bolts on the mounting bracket hold the track in place. You will need to loosen them so that you can move the track. Be sure not to remove them completely, as you will need them later.

Step Two: Move the Track In or Out

Now that you have loosened the bolts, use a screwdriver to move the track in or out until it is aligned with the other track. You may need to adjust it slightly left or right as well.

Step Three: Tighten the Bolts on the Mounting Bracket

Once the tracks are aligned, tighten the bolts on the mounting bracket to hold the track in place.

Step Four: Check for Alignment and Repeat as Necessary

Now, open and close the garage door to see how it moves. If it seems off-kilter or is not moving smoothly, you may need to repeat steps two through four until it is aligned correctly.

Step Five: Check the Rollers

In addition to checking the tracks, you should also check the rollers. Over time, they can become worn down and no longer work as effectively. Replacing them is a relatively easy process that you can do yourself.

Step Six: Check the Cables

The cables on your garage door help lift and lower the door. If they are frayed or broken, they will need to be replaced. It is a more difficult process, and you may want to call a professional to do it for you.

Step Seven: Lubricate the Moving Parts

Lubricating the moving parts of your garage door is an important step in keeping it operational. You can use a spray lubricant or a gel lubricant, whichever you prefer. Make sure to apply it evenly and sparingly.

Step Eight: Check the Safety Sensors

The safety sensors keep the garage door from closing on someone or something. If they are not working correctly, they will need to be replaced. It is a relatively easy process that you can do yourself.

Step Nine: Test the Door

Finally, after completing all of these steps, test out your newly aligned garage door to see if it is working properly. If not, go back and check each step to see. With a little bit of patience and attention to detail, your garage door should be good as new!


Garage door tracks that are not aligned can cause all sorts of problems for your garage door. Not only will the door be difficult to open and close, but it may also fall off the track or, worse, injure someone. This article shows you how to align your garage door tracks quickly and easily using a few simple tools. If you follow these instructions, your garage door should be running smoothly in no time!



Call Now Button Skip to content