How To Fix a Bent Garage Door Panel | Garage Door Panels

an image of a garage door

It’s important to have a well-functioning garage door. Not only does it look nice, but it also helps keep your car and other belongings safe and secure. Unfortunately, sometimes things can go wrong. If your garage door starts to malfunction, don’t panic! Garage doors are not indestructible. They can be bent or dented just like any other object.

Even the smallest dent can cause the door to become misaligned and jam. In some cases, the dent may be so severe that the garage door cannot be opened at all. If this happens, don’t try to force it open! You could damage the door or even injure yourself.

What Causes Garage Doors to be Bent and Dented?

Garage doors can be bent or dented for a variety of reasons. A car backing into the door, a ball hitting it during a game of catch, or even high winds can cause damage. If your garage is attached to your home, you may also experience water infiltration if the door isn’t properly weather-stripped.

Dents and bends will happen over time as the door is opened and closed.

What if the Door Won’t Close Properly?

This is a problem that is often caused by a bent garage door panel. If the door won’t close properly, it could be because the panel is out of alignment. This can be fixed by adjusting the hinges on the door. If you’re having trouble fixing your garage door, or if you don’t feel comfortable doing it yourself, take it to a professional.

How to Fix a Bent Garage Door Panel

Fixing a bent garage door panel is a fairly simple process, but it can be time-consuming. The most important thing to remember is not to try to fix the problem yourself if you don’t know what you’re doing. You could seriously injure yourself or do more damage to the door.

Here’s How to Fix a Bent Garage Door Panels:

Fill in The Dent

If the dent is small, you could fill it in with a sealant or some type of adhesive. This is a temporary fix, but it will at least keep the door from bending any further. If the dent is bigger, you’ll need to take the door to a professional garage door repair. They have the tools necessary to fix it properly.

Hammer Out the Dent

If you’re brave enough, you could try to hammer out the dent yourself. This is a risky process since you could damage the door further or even injure yourself. It’s usually best to leave this job to the professionals.

Use Suction Cups for Garage Door Panel Repair

If the dent is on a panel that’s removable, you could try using suction cups to pull it back into shape. This is a temporary fix, but it might be enough to get you by until you can take the door to a professional.

Using Heat to Fix a Bent Garage Door Panel

Heating a metal and cooling it down again can cause it to change shape. The metal is heated until it’s red hot and then quickly cooled down. This changes the shape of the metal and fixes the dent.

If all else fails, you could try using heat to fix the dent. This is a more permanent solution, but it’s also riskier. You’ll need to be careful not to damage the door panel or yourself in the process. If the panel is too badly damaged, you might have to replace the entire door.

Remove The Panel

If the dent is bigger, you’ll need to remove the panel so that you can access the damage. Use a screwdriver to remove the screws that hold the panel in place.

Replacing a Bent Garage Door Panel

If the panel is severely damaged, it will need to be replaced. You can buy replacement panels at most home improvement stores. The process of replacing the panel is fairly simple, but it will require some basic tools and a little bit of know-how.

Replace The Door

If the panel is too damaged for repair, you’ll need to replace the door. This is a more complicated process that will require some carpentry skills. You’ll also need to purchase a new garage door panel.

Take It To A Professional

If the dent is bigger, or if you’re not sure how to fix it, take the door to a professional. You’ll save time and effort because they’ll have the tools and skills to fix the door quickly and efficiently. Fixing it yourself will be a bad idea, as you might make the problem worse. So, save yourself some time and aggravation, and call in a professional.


Our garage door is an important part of our home. It’s important to keep it in good condition by repairing any damage as soon as possible. Knowing what causes the damage and how to fix it can help you keep your door in good shape for years to come.

If you’re looking for an efficient way to fix a bent garage door panel, follow these simple steps. It’s an easy and straightforward process that will require carpentry skills. You’ll also need to purchase a new garage door panel if the dent is bigger. If you’re not sure how to fix it, take the door to a professional. They have the things needed and knowledge to do the job for you.



Call Now Button Skip to content